How To Use a Paint Roller
Working with a paint roller is even less exacting than working with a brush. Even a novice painter can get the feel of it in just a few minutes.As with brushes, moisten the roller first with water for latex paint or the appropriate thinner for other types of paint. Roll out the excess moisture on a piece of scrap lumber or kraft paper or even on a paper grocery bag. Don't use newspaper because the roller may pick up the ink. Fill the well of the roller pan about half full, and set the roller into the middle of the well. Lift the roller and roll it down the slope of the pan, stopping just short of the well. Do this two or three times to allow the paint to work into the roller. Then, dip the roller into the well once more, and roll it on the slope until the pile is well saturated. You'll know immediately when you've overloaded the roller. It will drip en route to the wall and have a tendency to slide and smear instead of roll across the surface.
![]() © 2007 Publications International, Ltd. Using a paint roller requires a less exacting approach than a paintbrush, and using it well is a quickly-acquired skill. |
![]() © 2006 Publications International, Ltd. Using a zigzag pattern in one area at a time is the most effective method for using a paint roller. |
Not what you're looking for? Try these helpful articles:
- House Painting: Ready to tackle a house painting project? Gather helpful tips on both interior and exterior painting in this home improvement article.
- House Painting Tools: Before taking on any painting project, make sure you have the tools you'll need to do the job well. This article will help.
- Painting Interiors: Learn the essentials of painting walls, doors, and everything inside the house on this page.
- Paint Rollers: Find out when a paint roller is the best tool for the job on this page.




