The Basics

A light microscope works very much like a refracting telescope, but with some minor differences. Let's briefly review how a telescope works.

A telescope must gather large amounts of light from a dim, distant object; therefore, it needs a large objective lens to gather as much light as possible and bring it to a bright focus. Because the objective lens is large, it brings the image of the object to a focus at some distance away, which is why telescopes are much longer than microscopes. The eyepiece of the telescope then magnifies that image as it brings it to your eye.


Diagram of a typical student light microscope, showing the parts and the light path

In contrast to a telescope, a microscope must gather light from a tiny area of a thin, well-illuminated specimen that is close-by. So the microscope does not need a large objective lens. Instead, the objective lens of a microscope is small and spherical, which means that it has a much shorter focal length on either side. It brings the image of the object into focus at a short distance within the microscope's tube. The image is then magnified by a second lens, called an ocular lens or eyepiece, as it is brought to your eye.

The other major difference between a telescope and a microscope is that a microscope has a light source and a condenser. The condenser is a lens system that focuses the light from the source onto a tiny, bright spot of the specimen, which is the same area that the objective lens examines.

Also unlike a telescope, which has a fixed objective lens and interchangeable eyepieces, microscopes typically have interchangeable objective lenses and fixed eyepieces. By changing the objective lenses (going from relatively flat, low-magnification objectives to rounder, high-magnification objectives), a microscope can bring increasingly smaller areas into view -- light gathering is not the primary task of a microscope's objective lens, as it is a telescope's.

We'll take a detailed look at the parts of a microscope later in the article.

Make a Simple Microscope
You can make a simple microscope by using magnifying glasses and paper:
  1. Get two magnifying glasses and a sheet of printed paper.
  2. Hold one magnifying glass a short distance above the paper. The image of the print will look a little bit larger.
  3. Place the second magnifying glass between your eye and the first magnifying glass.
  4. Move the second glass up or down until the print comes into sharp focus. You will notice that the print appears larger than it does in the first magnifying glass.
You can also make a simple pinhole microscope that works like a pinhole camera. For details, see TOPScopes.